Part 4 - LCD Menu Configuration
26
Device
General
Setup Type
Selects the setup mode. Select
Basic
or
Advanced
when
controlling devices via RS485 connection only, or select
Advanced
when controlling devices via network and RS485
connection. When selecting the Advanced mode, you can only
register devices with an aid of the IDIS Discovery program.
Port
Selects the device to control via RS485 connection and
configure the RS485 port information for RS485 communication.
If you want to configure the port information for PTZ cameras in
Advanced mode, you must run the IDIS Discovery program. If
the port information for PTZ cameras is different from each other,
the cameras can only be controlled in Advanced mode but not in
Basic mode.
Setup
Number of CAMs
Enters the number of connected cameras when controlling PTZ
cameras via RS485 connection.
485ID, Model
Sets the RS485 ID and model number for a PTZ camera for
RS485 communication. The RS485 ID is used to distinguish the
camera from others when controlling it with a network keyboard,
so each must have a unique RS485 ID. Check the model
number of the PTZ camera after seeing
Part 6 - Appendix >
PTZ Camera Model Numbers
.
