Part 2 - Installation
17
5-2
Configure the information and click
OK
.
•
ID
: The network keyboard assigns the ID
automatically when the NVR is registered,
and you can change the ID. The ID is used to
distinguish it from other devices during control
with a network keyboard, so each must have a
unique ID.
•
Connection
: Select
Ethernet
and enter
the IP address, number of ports (Control
Port: Watch port), user ID, and password for
connection to the NVR if the NVR is connected
to the network. The user ID and password are
required to access the NVR. You must log on
as a user with permission to perform functions
for controlling the NVR. If another user is
logged on to the NVR, the current user must
be logged off from the NVR.
5-3
Click
Network Video Recorder
for the device
list, then click a registered NVR. A list of monitors
and cameras for the NVR appears.
•
[ID] Main Monitor 1, [ID] Main
Monitor 2:
Displays the monitor ID and its type
(Main Monitor 1: Main or primary monitor, Main
Monitor 2: Secondary monitor).
5-4
Click a monitor or camera in the list and
click
Edit
. Configure the monitor or camera
information.
•
ID
: The network keyboard assigns the ID
automatically when the NVR is registered,
and you can change the ID. The ID is used to
distinguish the monitor or camera from others
during control with a network keyboard, so
each must have a unique ID.
•
Type
: Set the type of the camera. Select
Fixed
if the camera is not a PTZ camera. Select
PTZ
Camera
if the camera is a PTZ camera.