Part 5 - Remote Setup
30
FEN
If the devices use the FEN feature, enter the
information on the FEN server for the device to be
registered.
•
FEN Server
: Enter the IP address or domain
name of the FEN server acquired from the device’s
network administrator. You can use the domain
name instead of IP address if you set the DNS
server during IP address setup.
•
Port
: Set the port number of the FEN server.
Devices
You can set the setup mode and register devices with
a network keyboard.
General
•
Setup type
: Select
Basic
or
Advanced
when
controlling devices via RS485 connection only,
or select
Advanced
when controlling devices via
network and RS485 connection.
-
Port
: Select the device to control via RS485
connection from the drop-down list and configure
the port information for RS485 communication. If
the PTZ cameras have different port information
from each other, you must register the cameras in
Advanced mode but not in Basic mode. For more
information about registration in Advanced mode,
see the following section.
Setup
The setup screen varies depending on the setup type
set in the
Device
–
General
setup.
General – Basic Mode
You can control devices only via RS485 connection
when registering the devices in Basic mode.