21
IMPORTANT: Once you have installed the new clean filters, you must press the
filter Reset button located on the control panel, located on the top of the unit. If
you do not do this step, the filter light indicator will stay lit and your AquaTru will
not track the life of the new filter.
IMPORTANT: After installing a new filter, always discard the first two
full water tanks the AquaTru produces.
If you have replaced a pH+ Mineral Boost Filter, filter and discard the
first four tanks.
Long Term Storage / Vacation
If leaving on vacation, start by unplugging the unit. Next, wash both the tap tank
and glass carafe with soap and water. Allow them to dry thoroughly before
reinstalling. When you have returned from vacation, purge the system of stagnant
water by running four full tap water tanks through the system and discarding the
water each time. Once the fourth tank has been filtered, the unit is ready to use.
This process can be avoided by having a house sitter run one tank of tap water
through the AquaTru at least once a week.
Cleaning & Maintenance: Filters
