19
Filter Replacement
AquaTru will track the usage of your filters
and let you know when it’s time for them to be
changed. When a filter needs to be changed,
the filter light will remain lit on either the Pre,
RO, or VOC indicator. Upon replacement,
press the filter
Reset
button on the control
panel
for 5 seconds
and the lights will turn off.
Longer filtering time can occur if hard water scale builds up on the RO membrane and
internal surfaces, which will slow and eventually block the water flow. If not addressed
with proper maintenance, this will add extra stress to the pump and filter that can
cause the machine to leak due to high-pressure and nowhere for the water to go, or
lead to complete product failure. Please address excess filter time immediately by
following appropriate descaling maintenance or replacement of an RO filter. If you
have any questions, please contact our customer support team.
Cleaning & Maintenance: Filters
Please visit our website to purchase replacement filters / aquatru.com
Note:
Depending on the water quality where you live and your pattern of usage
of the AquaTru, more frequent replacement of the RO Filter might be needed. If
the filtering time of one tank takes longer than 30 minutes (normally it should take
about 15 minutes), we recommend replacing your RO Filter regardless of if the
filter change light is on or not. If you change the filter prior to the indicator light
turning on, please follow instructions about how to reset the filter on page 20.
