13
Installation
NOTICE: Keep a close eye for any water leaks. In case of a leak, check the
"Troubleshooting" guide on page 21.
12.
AquaTru will stop filtering water when the clean water tank is full or when it is time
to refill the tap water tank.
All RO water filtration systems will produce waste water when “back washing”
the RO filter. Most traditional RO systems have this dirty little secret. They
waste up to five gallons of water to make just one gallon of pure water. With our
patented AquaTru recirculation RO system, it only takes one gallon of tap water
to makes about 3/4 gallons of pure water. The water left in the tap water tank
contains all the impurities from the tap water.
CAUTION! The water in the tap water tank must be
discarded every time you refill the tap water tank. Failure
to do so will damage the unit and void the warranty.
13.
Empty and rinse both water tanks.
14.
Repeat steps 9-13, three more times.
15.
When four cycles have been completed, your new water purifier is ready to be used.
Note: When it is time to refill the tap water tank, it will
be a quarter full.
The leftover water is waste water with concentrated
contaminants and MUST be emptied each time before refilling with tap water.
