Innovative Circuit Technology Ltd.
45
Send Test E-mail
: Click the
Send Test E-mail
button to send a test e-mail to the
listed e-mail recipients using the e-mail settings on the
E-mail Setup
page.
Ping Diagnostics Tool
: Use this feature to verify connectivity of any network
connected device. Enter the hostname or IP address of the target device, and then
click the
Ping
button to check if the device is active.
Router Configuration
Use this section to help you set up your MPS Ultra system with remote Internet
access when it is located behind a router.
A router allows multiple PC’s to share a single Internet connection, and must be
configured correctly to forward incoming remote data to the local IP address of
your panel.
Example configuration using a Linksys WRT54G router: (others will be similar)
1.
Log into your router and go to the port forwarding screen. In the
example Linksys WRT54G router this is located in the Applications and
Gaming tab. The location of the port forwarding fields may be different
on your particular router. (consult the router manual for instructions)
2.
Configure HTTP forwarding:
a.
Enter a unique name in the
Application
field
b.
Enter the HTTP port number that the panel is using in the
Start
and
End
fields. The default HTTP port for the panel is
80
.
c.
Select
Both
under
Protocol
(TCP and UDP)
d.
Enter the local IP address of the panel (e.g. 192.168.0.180) in the
IP
address
field. (see step 2 of the
Operation (Network GUI)
section
to verify the panel IP address)
e.
Check the
Enable
box, and then click on
Save Settings
NOTE:
Many ISP’s block acces
s to port 80, so if your ISP does block this port you must
change the HTTP port the panel uses from 80 to something else, such as 8000.