Innovative Circuit Technology Ltd.
39
access the panel (e.g. use URL
https://192.168.0.180:8888
for IP address
192.168.0.180
, port
8888
).
SNMP
Configure these settings if you would like to use SNMP based monitoring. SNMP
(Simple Network Management Protocol) is an industry standard protocol for
network management software. Enabling the SNMP function on the panel will
allow standard SNMP management software to connect to the SNMP agent
running on the panel and read real time system information such as bus voltage,
and channel currents. The panel can send SNMP traps to the external
management software when an alarm or fault occurs.
The information available from the SNMP agent is described in an MIB
(Management Information Base) file, which can be downloaded from the link at
the bottom of the SNMP box on this GUI page, or on the panels
Help
page. The
unique panel MIB file must then be imported into your external SNMP
management software.
Enable SNMP
: Check this box to enable the SNMP agent.
SNMP Version:
Select the SNMP version (
v1/v2c
,
v3
, or
All
) supported by the
SNMP agent. If
All
is selected, all SNMP versions will be supported
simultaneously. The appropriate settings for the selected SNMP version will need
to be configured.
Enable SNMP Write Access:
Check this box to allow remote SNMP control of the
system output and individual LDM output channels. If this box is unchecked, all
information available from the SNMP agent will be read-only.
SNMP Control Access:
Sets the level of device control that is allowed through
SNMP. This setting is only available if Enable SNMP Write Access is enabled.
•
Output Control:
Allows remote SNMP control of the system
output and LDM channel outputs only.
•
Full Device Control:
Allow SNMP clients to set all device
settings through SNMP. MIB files for full SNMP device control
can be downloaded from the ICT Website:
https://www.ict-power.com/tools-utilities/
SNMP Contact Information:
Enter contact information such as an operator name
and phone number for the panel, which can be read via SNMP queries. This
information is optional.
SNMPv1/v2c Settings: