Innovative Circuit Technology Ltd.
43
Record your new password(s) for future access! If the Administrator password is
lost the unit must be reset to return the password to the blank default setting,
causing loss of all other user settings. See the
Password Reset
section for more
details.
Select a User to Edit
: Choose which of the user accounts to edit. Set the access
level to be appropriate for the amount of control each user requires.
Administrator:
This level has full access to the panel settings, and can set
up users and change passwords
(“admin” is the defa
ult user)
Control:
User has read-only access to the panel, but can enable or disable
the outputs, and change some of the basic settings.
View-Only:
User can only view status, cannot change any settings
New Password:
Use these fields to change the password of the selected user.
New Password
: Enter the new password for the chosen user.
Confirm New Password
: Re-enter the new password to confirm the entry.
Confirm Changes
: Enter the current
Administrator Password
to confirm the
new password changes, prior to saving the settings.
Use the
MAINTENANCE
tab to reset the panel (soft reset), restore the panel
default settings, or send a test e-mail to verify e-mail functionality.
Reset Intelligent Controller Module
: Clicking the
Reset
button will restart the
controller. The LDM channel output states will be restored according to the
Output State after Panel Reset
setting for each output on the
Output Setup
page. All other settings are maintained during the reset.