32
Innovative Circuit Technology Ltd.
Click on the
SETTINGS & CONTROL
tab (or
MODULE #_ SETTINGS
tab if more than
one LDM module is installed) to configure all load distribution related settings.
Click on the
Save Settings
button at the bottom of the page to store your changes.
Module Control
Module Output Control
Output #_:
Click the
On
or
Off
button to remotely enable or disable that
output channel. All outputs are enabled as the factory default setting. If
power cycling is enabled for that output channel, the
Off
button will be
replaced with a
Cycle
button. Click the
Cycle
button to momentarily disable
that output channel like the example shown below and then re-enable
automatically after a time delay (set in the
Delay Time
field).
Master Output Control