A-41
A2
C.23 reboot
The reboot procedure is used to cause the Edevice to reboot. This causes
all device links to be cleared, all connections closed, all resources released,
and the default confi guration to be loaded and used during initialization.
struct Reboot_Resp {
unsigned
int
error;
};
Reboot_Resp reboot (void) = 23;
If the RPC message is of insuffi cient length to satisfy the required length,
an error value of 1 is returned.
The returned Reboot_Resp.error value determines whether the Edevice has
initiated a reboot process. Note that the timing of the reboot process may
block the RPC reply.
* Note that certain confi guration settings are only set at boot time. Thus
when setting confi guration settings, it is recommended that the Reboot
command always terminates the confi guration setting.
error Meaning
0
No error
1
Syntax error
Summary of Contents for N4865A
