5-6
5
5.5
RESETTING TO DEFAULT NETWORK SETTINGS
The N4865A can be reset to the default network settings listed in Table 1-2 by
holding the rear panel LAN Reset Button in for 10 seconds while turning the
N4865A’s Power Switch on.
1. Connect the supplied AC adapter to the N4865A and to an AC power
outlet. Be sure the N4865A Power Switch is turned off.
2. Find a blunt non-metallic stick about 1/16 inch diameter (1.6 mm) that you
can use to depress the rear panel LAN Reset button. (A wooden Q-tip
handle works well.) You should be able to feel the Reset button move as
you gently depress it.
3. Hold the Reset button depressed and turn the Power Switch on. Keep the
button depressed until the three front panel yellow LEDs blink.
4. Release the Reset button and turn Power off before connecting any cables
to the unit.
Summary of Contents for N4865A
