A-37
A2
C.19 eos_char
The eos_char procedure is used to read/modify the EOS character.
struct Eos_Char_Parms {
unsigned
int
action;
unsigned
int
eos;
};
struct Eos_Char_Resp {
unsigned
int
error;
unsigned
int
eos;
};
Eos_Char_Resp eos_char (Eos_Char_Parms) = 19;
The action value determines whether the client wishes to execute a read of
the current setting, or a modifi cation of the current value.
action = 0 = read of current value
action = 1 = modify current value
If the action value is other than 0 or 1, then an error value of 5 is re-
turned.
If the RPC message is of insuffi cient length to satisfy the required length,
an error value of 1 is returned.
The eos character must be in the range of 0x00 through 0xFF. An error of
5 is returned and the current EOS char is unchanged if eos is determined
to be invalid.
The returned Eos_Char_Resp structure will always contain the current
automatic EOS character, irrespective of the error value.
error Meaning
0
No error
1
Syntax error
5
Parameter error
Summary of Contents for N4865A
