A-27
A2
C.9
ip_number
The ip_number procedure is used to read/modify the static IP number. If
static_ip_mode is set TRUE, then the Edevice will use a static IP (see the
static_ip_mode function) and will need a netmask and gateway IP.
struct IP_Number_Parms {
unsigned
int
action;
unsigned
char ip[4];
};
struct IP_Number_Resp {
unsigned
int
error;
unsigned
char ip[4];
};
IP_Number_Resp ip_number (IP_Number_Parms) = 9;
The action value determines whether the client wishes to execute a read of
the current setting, or a modifi cation of the current value.
action = 0 = read of current value
action = 1 = modify current value
If the action value is other than 0 or 1, then an error value of 5 is re-
turned.
If the RPC message is of insuffi cient length to satisfy the required length,
an error value of 1 is returned.
The ip must be exactly 4-bytes in length. An error of 5 is returned and the
current IP is unchanged if the IP is determined to be invalid.
The returned IP_Number_Resp structure will always contain the current
IP, irrespective of the error value.
* Note that the IP will only be used if Static IP is selected.
error Meaning
0
No error
1
Syntax error
5
Parameter error
Summary of Contents for N4865A
