A-26
A2
C.8
static_ip_mode
The static_ip_mode procedure is used to read/modify the static IP mode. If
static_ip_mode is set TRUE, then the Edevice will use a static IP and will
need a netmask and gateway IP.
struct Static_IP_Parms {
unsigned
int
action;
unsigned
int
mode;
};
struct Static_IP_Resp {
unsigned
int
error;
unsigned
int
mode;
};
Static_IP_Resp static_ip_mode (Static_IP_Parms) = 8;
The action value determines whether the client wishes to execute a read of
the current setting, or a modifi cation of the current value.
action = 0 = read of current value
action = 1 = modify current value
If the action value is other than 0 or 1, then an error value of 5 is re-
turned.
If the RPC message is of insuffi cient length to satisfy the required length,
an error value of 1 is returned.
The mode must be either 0 (dynamic) or 1 (static). An error of 5 is returned
and the static IP mode is unchanged if the mode fi eld is any other value.
The returned Static_IP_Resp structure will always contain the current static
IP mode, irrespective of the error value.
error Meaning
0
No error
1
Syntax error
5
Parameter error
Summary of Contents for N4865A
