ICPDAS IR-712A User Manual Download Page 19

Page: 19 / 38

IR-712A Universal IR Learning Remote Module (Ver. 1.3, Aug/23/2016) 18

3.2.1

Menu

Table 3-1 lists the menu items in the IR-712A Utility.

Table 3-1

The items of menu.

Item

Sub item

Description

File

Load IR Commands from File

Load the IR command file to the utility.

Unload IR Commands

Unload the IR commands from the utility.

Save IR Commands to File

Save the IR command to the defined file from

the utility.

Copy IR Cmds from File

Copy IR commands from IR learning data file.

Exit

Close the IR-712A utility.

Download

Download IR Commands to IR-

712A

Download the temporary IR commands of the

utility to the flash memory of IR-712A.

Load IR Commands from IR-712A

Load the temporary IR commands from the

flash memory to the utility.

Setting

IR-210 Basic Settings

The basic settings of the IR-712A.

Reset Basic Settings on IR-712A

Reset the basic settings.

Tool

Update Firmware to IR-712A

This function provides users to update the

firmware of the IR-712A.

Waveform of IR Commands

Show demodulated waveform of IR commands.

Help

About IR-712A Utility

The information of the IR-712A.

(1) File

‧

Load IR Command from File

The IR command file obtains the IR learning data. The filename extension is IRD.

Click this item would pop up an Open File Dialog for users to find and load the IR
command file.

‧

Unload IR Commands

This function would clear all the IR learning commands temporarily buffered in the

items of the

“Device Name” and “Command Name” combo boxes in the section of

the

“Test and Save Learned IR Commands.” The quantity and values of the devices

and IR commands are reset to the default.

‧

Save IR Commands to File

This item provides a Save File Dialog to save the IR learning commands to an IRD

file.

Summary of Contents for IR-712A







































Search results

Summary of Contents for IR-712A

Reviews:

Related manuals for IR-712A

Brands by name

Popular brands

ICPDAS IR-712A, User Manual

Search results

Summary of Contents for IR-712A

Reviews:

Related manuals for IR-712A

Brands by name

Popular brands