IR-712A Universal IR Learning Remote Module (Ver. 1.3, Aug/23/2016) 26
the storage state for the current IR learning command. Three colors indicate three
different states as follows:
Table 3-3
The state of IR command storage
Color
Description
Red
The IR learning command has been saved in the item of the
“Command Name”
combo box.
Yellow
The IR learning command has been saved temporarily in the item of the
“Command Name” combo box. If the other item is selected, the data would
disappear.
White
There is no IR learning command in this item.
Figure 3-17
The rectangle to show IR learning state
● “Run Command” Button
When learning an IR command is finished, users can test this IR command emitted
from the IR-712A by clicking
“Run Command” button. The “Output Channel” combo
box specifies the IR output channels.
● “Save this Cmd” Button
This button can save the current learned IR command into the Utility. When finishing
all the learned commands, click Menu [File]->[Save IR Commands to File] to save all
IR commands to an backup file (*.ird).
● “Clear this Cmd” Button
Click
“Clear this Cmd” button to remove the learned IR command data corresponding
to the item in the
“Command Name” combo box.
● “Clear All Cmds” Button
Click
“Clear All Cmd” button to remove all the learned IR command data corresponding
to all the items but not items themselves in the
“Command Name” combo box. Please
click Menu [File]->[Unload IR Commands] to clear all IR commands data as well as
reset the names and quantity of the items to the default in
“Command Name” combo
box.
