IR-712A Universal IR Learning Remote Module (Ver. 1.3, Aug/23/2016) 23
3.2.3 Set Device & IR Command Quantity
The IR device & command quantity for learning can be configured in this section.
Please click
“Set Device & IR Command Quantity” button (Figure 3-9) to set them up in
three steps (Figure 3-10 ~ Figure 3-13).
Figure 3-9
Configure IR command quantity for IR learning.
● Step 1: Set the IR device quantity
The max quantity of controlled devices is 11. This function is convenient for users to
manage IR commands in groups as shown in Fig. 3-10.
Figure 3-10
The quantity setting of the device (Step1).
● Step 2: Define the device names and set the IR commands quantity
This step (Fig. 3-11) can set the names of the devices and the quantity of the IR
command. The prefix number of each device name is the device serial number. The
quantity of the IR command cannot exceed 224, or the utility would pop up an error
message box and show the remaining quantity for configuration (Fig. 3-12).
