![background image](http://html1.mh-extra.com/html/icom/if4261dt/if4261dt_operating-manual_2038195080.webp)
7
NXDN™ OPERATION
7-25
Transmitting a call
D
Transmitting a Remote Monitor call (Continued)
<Key operation>
Using [Digital Button]:
1. Push [Digital Button] to enter the Application
Selection mode.
•
The current call type is briefly displayed, then “VOICE”
is displayed.
L
To change the call type, see page 7-3.
2. Push [CH Up] or [CH Down] to select “REM
MON,” then push [Digital Button].
Portable
REM MON
MENU DIGI ZONE SET
DIGI
Mobile
R E M
M O N
•Enters the Destination ID Selection mode.
3. Push [CH Up] or [CH Down] to select the
destination ID.
Portable
REM MON
Station1
MENU DIGI ZONE SET
DIGI
Mobile
R E M
M O N
S t a t i o n 1
4. Push [PTT] to transmit the Remote Monitor call.
• “REM TX” is displayed while transmitting.
L
When the call type is “Talkgroup,”
[P1](TX)
or
[P2]
is
disabled.
5. When an acknowledgment is received, “REM
ACK” is displayed.
L
“REM FAIL” is displayed if the target station does not
send back an acknowledgement.
Using [Individual]:
1. Push [Individual] to enter the Application Selection
mode.
•
“INDIVIDUAL” is briefly displayed, then “VOICE” is
displayed.
2. Push [CH Up] or [CH Down] to select “REM
MON,” then push [Individual].
Portable
REM MON
MENU DIGI ZONE SET
INDV
Mobile
R E M
M O N
•Enters the Destination ID Selection mode.
3. Push [CH Up] or [CH Down] to select the
destination ID.
Portable
REM MON
Station1
MENU DIGI ZONE SET
INDV
Mobile
R E M
M O N
S t a t i o n 1
4. Push [PTT] to transmit the Remote Monitor call.
• “REM TX” is displayed while transmitting.
L
When the call type is “Talkgroup,”
[P1](TX)
or
[P2]
is
disabled.
5. When an acknowledgment is received, “REM
ACK” is displayed.
L
“REM FAIL” is displayed if the target station does not
send back an acknowledgement.
Previous view