![background image](http://html1.mh-extra.com/html/icom/if4261dt/if4261dt_operating-manual_2038195050.webp)
6
SCAN OPERATION
6-2
Starting a Scan
A Scan checks for signals on each channel and stops
when a signal is received.
NOTE:
Two or more channels must be preset to start
a Scan.
<Key operation>
Push [Scan Start/Stop] to start a Scan.
•“
” (Portable) blinks.
•The scan text is displayed, depending on the presetting.
L
When a signal is detected, the Scan pauses on the
channel until the signal disappears, and then the Scan
resumes.
<Menu operation>
TIP:
The Portable type transceiver’s operations are
described in
red
. And the Mobile type transceiver’s
operations are described in
blue
.
L
The common operations are in black.
(MENU > SCAN >
SCAN
)
1. Push [Menu] to display the Menu screen.
2. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “SCAN,” and then push
[P1](ENT)
or
[P2]
.
Portable
ENT
BACK
SCAN
Mobile
M E N U
S C A N
3. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “SCAN,” and then push
[P1](ENT)
or
[P2]
.
Portable
SCAN
SCAN
ENT
BACK
Mobile
S C A N
S C A N
4. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
to
select “ON.”
Portable
SCAN
ON
OK
CANC
Mobile
S C A N
O N
5. Push
[P1](OK)
or
[P2]
.
• The Scan starts.
•“
” (Portable) blinks.
• The scan text is displayed, depending on the
presetting.
L
When a signal is detected, the Scan pauses on the
channel until the signal disappears, then the Scan
resumes.
Previous view