manualshive.com logo in svg

Icom iF4261DT, Operating Manual

Share
Download
Icom iF4261DT Operating Manual Download Page 76

7

NXDN™ OPERATION

7-21

Transmitting a call

 

D

Transmitting a Status Polling call (Continued)

<Key operation>

Using [Digital Button]:

1.   Push [Digital Button] to enter the Application 

Selection mode.

 •

 The current call type is briefly displayed, then “VOICE” 

is displayed.

L

To change the call type, see page 7-3.

2.   Push [CH Up] or [CH Down] to select “STAT POL,” 

then push [Digital Button].

   Portable

  

STAT POL

MENU   DIGI   ZONE    SET

DIGI

   Mobile

  

S T A T

P O L

 •Enters the Destination ID Selection mode.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

STAT POL
Station1

MENU   DIGI   ZONE    SET

DIGI

   Mobile

  

S T A T

P O L

S t a t i o n 1

4.   Push [PTT] to transmit a Status Polling call.

 • “STAT POL” is displayed while transmitting.

5.   When an acknowledgment is received, the target 

station’s status and ID blink.

 •“

” (Portable) or “ ” (Mobile) is displayed.

L

 “POL FAIL” is displayed if the target station does not 

send back an acknowledgement.

<Key operation>

Using [Individual]:

1.   Push [Individual] to enter the Application Selection 

mode.

 •

 “INDIVIDUAL” is briefly displayed, then “VOICE” is 

displayed.

2.   Push [CH Up] or [CH Down] to select “STAT POL,” 

then push [Individual].

   Portable

  

STAT POL

MENU   DIGI   ZONE    SET

INDV

   Mobile

  

S T A T

P O L

 •Enters the Destination ID Selection mode.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

STAT POL
Station1

MENU   DIGI   ZONE    SET

INDV

   Mobile

  

S T A T

P O L

S t a t i o n 1

4.   Push [PTT] to transmit the Status Polling call.

 • “STAT POL” is displayed while transmitting.

5.   When an acknowledgment is received, the target 

station’s status and ID blink.

 •“

” (Portable) or “ ” (Mobile) is displayed.

L

 “POL FAIL” is displayed if the target station does not 

send back an acknowledgement.

Previous view

Summary of Contents for iF4261DT




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands