![background image](http://html1.mh-extra.com/html/icom/if4261dt/if4261dt_operating-manual_2038195047.webp)
5
MENU SCREEN
5-13
Menu items
D
Utility menu (Continued)
•
Squelch Level
“SQL LEVEL”
Set the squelch level to between 0 and 9.
1. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
one or
more times to set the squelch level to between 0
and 9, and then push
[P1](OK)
or
[P2]
to save.
• Push
[P0](CANC)
or
[P1]
to cancel, and return to the
previous screen.
2. Push
[P0](BACK)
or
[P1]
to return to the previous
screen.
•
AF Minimum Level
“AF MIN LEVEL”
Set the minimum audio output level to between 0 and
255.
This set level is used when [VOL] is set to the
minimum audio position.
1. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
one or
more times to set the minimum audio output level
to between 0 and 255, and then push
[P1](OK)
or
[P2]
to save.
• Push
[P0](CANC)
or
[P1]
to cancel, and return to the
previous screen.
2. Push
[P0](BACK)
or
[P1]
to return to the previous
screen.
•
Mic Gain
“MIC GAIN”
Set the microphone sensitivity to between 1(Min) and
5 (Max).
Higher values make the microphone more sensitive to
the user voice.
1. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
one or
more times to set the microphone sensitivity level
to between 1 and 5, and then push
[P1](OK)
or
[P2]
to save.
• Push
[P0](CANC)
or
[P1]
to cancel, and return to the
previous screen.
2. Push
[P0](BACK)
or
[P1]
to return to the previous
screen.
•
VOX Gain
“VOX GAIN”
(For the Portable type transceiver)
Set the VOX gain to OFF, or to between 1 and 6.
The VOX function automatically switches between
receive and transmit without needing to push [PTT].
Higher values make the VOX function more sensitive
to the user voice.
1. Push
[P2](
Ω
) or [P3](
≈
)
one or more times to set
the VOX gain to OFF, or to between 1 and 6, and
then push
[P1](OK)
to save.
L
Push
[P0](CANC)
to cancel, and return to the
previous screen.
2. Push
[P0](BACK)
to return to the previous screen.
•
VOX Delay
“VOX DELAY”
(For the Portable type transceiver)
Set the VOX Delay to between 0.5 and 3.0 seconds.
The VOX Delay is the amount of time the transmitter
stays ON after the user stops speaking before the
VOX switches to receive.
1. Push
[P2](
Ω
) or [P3](
≈
)
one or more times to set
the VOX Delay to between 0.5 and 3.0 seconds,
and then push
[P1](OK)
to save.
L
Push
[P0](CANC)
to cancel, and return to the
previous screen.
2. Push
[P0](BACK)
to return to the previous screen.
Information
•
Firmware Information
“FIRM INFO”
Displays the transceiver’s firmware information.
When an optional unit is installed, you can also check
the unit information.
Depending on the installed unit, only the name may
be displayed.
1. Push
[P2](
Ω
) or [P3](
≈
)
or
[
Ω
P3] or [P4
≈
]
one
or more times to select an item to display the
firmware information.
2. Push
[P0](BACK)
or
[P1]
to return to the previous
screen.
•
Clone Comment
“CLN COMMENT”
Displays the transceiver’s clone comment.
The clone comment 1 is displayed on the upper line,
and the clone comment 2 is on the lower line.
L
Push
[P0](BACK)
or
[P1]
to return to the previous screen.
•
ESN
“ESN”
Displays the transceiver’s ESN (Electric Serial
Number).
L
Push
[P0](BACK)
or
[P1]
to return to the previous screen.
•
Unit ID
“UNIT ID”
Displays the transceiver’s unit ID.
L
Push
[P0](BACK)
or
[P1]
to return to the previous screen.
Previous view