manualshive.com logo in svg

Icom iF4261DT, Operating Manual

Share
Download
Icom iF4261DT Operating Manual Download Page 60

7

NXDN™ OPERATION

7-5

 

D

Transmitting a Voice call (Continued)

Transmitting a call

<Key operation>

Using [Digital Button]:

1.   Push [Digital Button] to enter the Application 

Selection mode.

 •

 The current call type is briefly displayed, then “VOICE” 

is displayed.

L

To change the call type, see page 7-3.

   Portable

  

VOICE

MENU   DIGI   ZONE    SET

   Mobile

  

V O I C E

2.   Push [Digital Button] again to enter the destination 

ID selection mode.

 •The preset ID is displayed.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

VOICE
TG1

MENU   DIGI   ZONE    SET

   Mobile

  

V O I C E
T G 1

4.   Hold down [PTT] to transmit, and speak at your 

normal voice level.

 • The status indicator lights red while transmitting.

5.   Release [PTT] to receive.

Using [Individual] or [Talkgroup]:

1.   Push [Individual] or [Talkgroup] to set the call 

type to “Individual” or “Talkgroup,” then enter the 

Application Selection mode.

 •

 “INDIVIDUAL” or “TALKGROUP” is briefly displayed, 

then “VOICE” is displayed.

   Portable

  

VOICE

MENU   TGID   ZONE    SET

TGID

   Mobile

  

V O I C E

2.   Push [Individual] or [Talkgroup] again to enter the 

destination ID selection mode.

 •The preset ID is displayed.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

VOICE
TG1

MENU   TGID   ZONE    SET

TGID

   Mobile

  

V O I C E
T G 1

4.   Hold down [PTT] to transmit, and speak at your 

normal voice level.

 • The status indicator lights red while transmitting.

5.   Release [PTT] to receive.

Previous view

Summary of Contents for iF4261DT




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands