![background image](http://html1.mh-extra.com/html/icom/if4261dt/if4261dt_operating-manual_2038195021.webp)
3
BASIC OPERATION
3-2
Turning ON the transceiver
Portable:
Rotate [VOL] to turn ON the transceiver.
• The battery voltage or the opening text may be displayed,
depending on the presetting.
Mobile:
Push the Power key to turn ON the transceiver.
• The opening text may be displayed, depending on the
presetting.
D
Entering the password
1. If the transceiver is preset for a Power ON
password, when turning ON the transceiver,
“PASSWORD” is displayed.
2.
Portable:
Push the [0] to [9] digit keys to enter the
password.
Mobile:
Push the keys according to the table below.
• The transceiver detects numbers in the same block
as identical. Therefore “01234” and “56789” are the
same.
KEY
[P0]
[P1]
[P2]
[P3]
[P4]
NUMBER
0
5
1
6
2
7
3
8
4
9
3. Repeat step 2 to enter the password.
4. After entering the correct password, the
transceiver automatically enter the Standby mode.
NOTE:
If the transceiver does not enter the Standby
mode after entering the password, the entered code
may be incorrect. In that case, enter the correct
code.
D
Adjusting the audio level
When receiving a call, rotate [VOL] to adjust the audio
output level to a comfortable listening level.
[VOL]
Power key
[VOL]
NOTE:
Before using the transceiver for the first time,
the battery pack must be fully charged for optimum
life and operation. See the INSTRUCTIONS for
details.
Previous view