manualshive.com logo in svg

Icom iF4261DT, Operating Manual

Share
Download
Icom iF4261DT Operating Manual Download Page 78

7

NXDN™ OPERATION

7-23

Transmitting a call

 

D

Transmitting a Radio Check call (Continued)

<Key operation>

Using [Digital Button]:

1.   Push [Digital Button] to enter the Application 

Selection mode.

 •

 The current call type is briefly displayed, then “VOICE” 

is displayed.

L

To change the call type, see page 7-3.

2.   Push [CH Up] or [CH Down] to select 

“RADIOCHK,” then push [Digital Button].

   Portable

  

RADIOCHK

MENU   DIGI   ZONE    SET

DIGI

   Mobile

  

R A D I O C H K

 •Enters the Destination ID Selection mode.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

RADIOCHK
Station1

MENU   DIGI   ZONE    SET

DIGI

   Mobile

  

R A D I O C H K
S t a t i o n 1

4.   Push [PTT] to transmit the Radio Check call.

 • “RDO CHK” is displayed while transmitting.

L

 When the call type is “Talkgroup,” 

[P1](TX)

 or 

[P2]

 is 

disabled.

5.   When an acknowledgment is received, “CHK 

ACK” is displayed.

L

 “CHK FAIL” is displayed if the target station does not 

send back an acknowledgement.

Using [Individual]:

1.   Push [Individual] to enter the Application Selection 

mode.

 •

 “INDIVIDUAL” is briefly displayed, then “VOICE” is 

displayed.

2.   Push [CH Up] or [CH Down] to select “RADIO 

CHECK,” then push [Individual].

   Portable

  

RADIOCHK

MENU   DIGI   ZONE    SET

INDV

   Mobile

  

R A D I O C H K

 •Enters the Destination ID Selection mode.

3.   Push [CH Up] or [CH Down] to select the 

destination ID.

   Portable

  

RADIOCHK
Station1

MENU   DIGI   ZONE    SET

INDV

   Mobile

  

R A D I O C H K
S t a t i o n 1

4.   Push [PTT] to transmit the Radio Check call.

 • “RDO CHK” is displayed while transmitting.

L

 When the call type is “Talkgroup,” 

[P1](TX)

 or 

[P2]

 is 

disabled.

5.   When an acknowledgment is received, “CHK 

ACK” is displayed.

L

 “CHK FAIL” is displayed if the target station does not 

send back an acknowledgement.

Previous view

Summary of Contents for iF4261DT




































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands