59
New2001
D-STAR GUIDE
D-STAR OPERATION
Step 4: Removing the microSD card
Turn OFF the transceiver, then remove the microSD card
from your PC, and insert it into the transceiver’s slot.
TIP:
We recommends that you save the current data
before loading other data into the transceiver.
Step 5: Updating the repeater list
MENU > SD Card > Import/Export >
Import
1. Push [MENU].
2. Select “SD Card.”
•
Displays the SD CARD screen.
3. Select “Import/Export.”
•
Displays the IMPORT/EXPORT screen.
4. Select “Import.”
•
Displays the IMPORT screen.
5. Select “Repeater List.”
•
Displays the REPEATER LIST screen.
Transceiver
microSD
card
PC
From the memory
card reader
6. Select the CSV file to be loaded.
• The confirmation dialog “Keep ‛SKIP’ settings in Repeater
List?” is displayed.
7. Select <YES> or <NO>.
•
YES:
Retains the skip settings of the repeater list.
(See ADVANCED MANUAL Section 4)
•
NO:
Does not retain the skip settings of the
repeater list.
• The confirmation dialog “Import file?” is displayed.
8. Select <YES>.
•
Starts the import.
•
While importing, “IMPORTING” and a progress bar are
displayed.
•
After importing ends, “COMPLETED!” is displayed.
9. To complete the importing, reboot the transceiver.
TIP:
If you copy the ICF file to the “Setting” folder of the
microSD card, the repeater list can be updated with the
same procedures. In that case, select “Load Setting” on
the SD CARD screen. And on the LOAD FILE screen,
select “Repeater List Only.”
(MENU > SD Card >
Load Setting
)
■
Updating the repeater list
[ENT]
[Down]
[Up]