47
New2001
D-STAR GUIDE
D-STAR OPERATION
After you receive a signal, the calling station’s call sign can
be captured by holding down the Call Sign Capture key
([RX
→
CS]) for 1 second. After releasing, you can quickly
and easily reply to the call.
What is the Call Sign Capture key?
Holding down the Call Sign Capture key for 1 second
sets the last received station’s call sign as a temporary
destination, and makes replying quick and easy.
Step 1: Set the received call sign to “TO” (Destination).
While receiving, hold down [RX
→
CS] for 1 second.
•
After releasing the key, the transceiver announces the station call
sign and the call sign is captured.
Information
L
•
If you want to select another call sign in the RX History, rotate
[DIAL] while holding down [RX
→
CS].
•
You can change the setting of the [RX
→
CS] key on the MENU
screen. If
[RX→CS] Key
is set to “RX > CS List,” the received call
sign is not captured. The RX History list is displayed instead.
(MENU > DV Set >
[RX>CS] Key
)
•
When a received signal is weak, or during a DV scan, the call sign
may not be correctly received. In that case, you cannot capture
the call sign.
•
When
RX > CS SPEECH
is set to “OFF,” the transceiver does not
announce the call sign.
(MENU > SPEECH >
RX > CS SPEECH
)
Step 2: Hold down [PTT] to transmit.
•
The TX/RX indicator lights red while transmitting.
L
Push [RX
→
CS] to return to the previous call sign setting.
■
Capturing a call sign
While holding down
After releasing
←Captured!
