51
New2001
D-STAR GUIDE
D-STAR OPERATION
This section describes the simplex operation (through no
repeater).
NOTE:
Depending on the transceiver's version,
the frequencies may be different. Check for usable
frequencies for your operating area.
What is a Simplex Call?
A simplex call is a direct call to another station on a single
frequency, not using a repeater.
■
Making a Simplex call
D
In the VFO mode
1. Push [V/MHz] to enter the VFO mode.
2. Push [FM/DV] to set the operating mode to DV.
3. Rotate [DIAL] to set the operating frequency. (p. 15)
4. Hold down [LOW] for 1 second to set an output power.
Information
L
•
You can select S-LOW, LOW 1, LOW 2, MID, or HIGH each
time you hold down [LOW] for 1 second.
•
You can also select an output power by rotating [DIAL] while
holding down [LOW].
•
When you select a high power, the power icon disappears.
•
Select a level to suit your operating requirements.
5. Hold down [PTT] to transmit, and speak into the
microphone at your normal voice level.
•
The TX/RX indicator lights red.
•
The S/RF meter displays the output power level.
6. Release [PTT] to receive.
TIP:
If you enter a DV simplex frequency to a Memory
channel, you can also make a simplex call in the Memory
mode. See page 21 on how to enter Memory channels.
