54
New2001
D-STAR GUIDE
D-STAR OPERATION
D
Linking to a reflector
If your repeater is not currently linked to a reflector, or if
you want to change it to another reflector, follow the steps
below. Before linking to another reflector, BE SURE to
unlink the current reflector. (p. 53)
Direct inputting a reflector
Example: Directly enter “REF030CL.”
1.
Push [RX→CS] to select “TO,” then push [ENT].
2. Select “Reflector.”
3.
Select “Link to Reflector.”
4. Select “Direct Input.”
5.
Rotate [DIAL] to select the reflector number.
6. Push [CS] to move the cursor to the right box.
7. Rotate [DIAL] to select the module letter.
8. Push [ENT].
• Returns to the DR screen, and “Link to Reflector” and
“REF030CL” are displayed in “TO.”
9. Hold down [PTT] to link to the reflector.
•
The TX/RX indicator lights red while transmitting.
[ENT]
[Down]
[Up]
( Example: C)
Blinks
Blinks
( Example: 030)