44
New2001
D-STAR GUIDE
D-STAR OPERATION
•
Returns to the DR screen, and the selected repeater name is
displayed in “TO.”
Step 3: Check whether you can access the repeater.
Hold down [PTT] for 1 second to access the repeater.
L
If you get a reply call, or “UR?” is displayed within 3
seconds, your signal reached your access repeater and
your call was successfully sent from your destination
repeater.
TIP:
See page 62 for status indications after a reply is
received.
Step 2: Set “TO” (Destination).
1.
Push [RX→CS] to select “TO” then push [ENT].
2. Select “Gateway CQ.”
3. Select the repeater group where your destination
repeater is listed.
4. Select your destination repeater.
(
Example: “Melbourne”)
[ENT]
[Down]
[Up]
Successfully sent!
(
Example: “Australia”)