background image

56

New2001

D-STAR GUIDE

D-STAR OPERATION

 

D

Reflector Echo Testing

To confirm that your signal is correctly getting into the 

repeater, you can transmit a short message as a trial.

After releasing [PTT], your message will be played back.

1. 

 Push [RX→CS] to select “TO,” then push [ENT].

 

Displays the TO SELECT screen.

2.  Select “Reflector.”

 

Displays the REFLECTOR screen.

3.  Select “Echo Test.”

 

 Returns to the DR screen, and “Echo Test” and “E” are 

displayed in “TO.”

4.  Hold down [PTT] and speak into the microphone.

 

The TX/RX indicator lights red while transmitting.

5.   Release [PTT] to hear your message.

 

D

 Requesting repeater information

When you send the repeater information command, an ID 

message is sent back.

1. 

 Push [RX→CS] to select “TO,” then push [ENT].

 

Displays the TO SELECT screen.

2.  Select “Reflector.”

 

Displays the REFLECTOR screen.

3.  Select “Repeater Information.” 

 

 Returns to the DR screen, and “Repeater Information” and “I” 

are displayed in “TO.”

4.   Hold down [PTT] to transmit the repeater information 

command

.

 

The TX/RX indicator lights red while transmitting.

5.   Release [PTT] to hear the repeater ID message.

[ENT]

[Down]

[Up]

[ENT]

[Down]

[Up]

Summary of Contents for ID-31A PLUS





















































































Reviews: