15
3
BASIC OPERATION
New2001
New2001
BASIC MANUAL
D
Selecting a tuning step
When you select the operating frequency by rotating [DIAL]
in the VFO mode, the frequency changes in the selected
tuning step.
1. Push [QUICK].
2. Rotate [DIAL] to select “TS.”
3. Select a tuning step.
Optifns (kHz):
5.0
6.25
10.0
12.5
15.0
20.0
25.0
30.0
50.0
100.0
125.0
200.0
•
Sets the tuning step, then returns to the standby screen.
L
You can set the tuning step for both the VFO and Memory
mode.
L
The VFO mode scan and the Band Scope function also use
this step to search for a signal.
D
Selecting the 1 MHz tuning
You can change the operating frequency in ‘MHz’ steps for
quick tuning.
1. In the VFO mode, push [V/MHz].
•
Enters the 1 MHz Tuning Select mode.
•
The 1 MHz digit blinks.
2. Rotate [DIAL].
•
The frequency changes in 1 MHz steps.
3. Push [ENT].
•
Sets the frequency, then returns to the standby screen.
L
The tuning step setting (to the left) remains.
■
Setting a noequency
Blinks
Blinks
