Icom IC-R5, Instruction Manual

Page: 54 / 80

43
9
SET MODE
New2001
D D
Key lock effect
While the key lock function is ON, [
Y
]/[
Z
] and [SQL] can still
be accessed. Accessible switches can be set to one of 4
groups.
[PWR] and [FUNC]+[BAND•
] are also accessible during
the lock, however, these switches are not effected by this set-
ting.
• NORMAL : [
Y
]/[
Z
] and [SQL] are accessible. (default)
• NO SQL : [SQL] is accessible.
• NO VOL : [
Y
]/[
Z
] are accessible.
• ALL : No accessible switch is available, except
[PWR] and [FUNC]+[BAND• ].
D D
Dial speed acceleration
The dial speed acceleration automatically speeds up the tun-
ing dial speed when rotating [DIAL] rapidly.
• ON : The dial speed acceleration is tuned ON.
(default)
• OFF : The dial speed acceleration is turned OFF.
D D
Monitor switch action
The monitor switch, [SQL], can be set as a ‘sticky’ switch.
When set to the sticky condition, each push of [SQL] toggles
the monitor function ON and OFF.
• PUSH : Pushing and holding [SQL] to monitor the fre-
quency. (default)
• HOLD : Push [SQL] momentarily to monitor the fre-
quency and push momentarily again to cancel it.
Push and hold [SQL] to monitor Push to monitor
The acceleration ON The acceleration OFF
Normal lock condition
Audio output can be adjusted
Squelch level can be adjusted
Receiver power and lock
function only switchable
IC-R5_1.qxd 02.10.23 11:29 Page 43 (1,1)