Icom IC-R5, Instruction Manual

Page: 33 / 80

22
5
MEMORY CHANNELS
New2001
5
■
Memory clearing
Contents of programmed memories can be cleared (blanked),
if desired.
q
Push [V/M•S.MW•
~
] for 1 sec. to select select memory
write condition.
• 1 short and 1 long beeps sound.
• “
” indicator and memory channel number blink.
• Do not hold [V/M•S.MW• ~ ] for more than 2 sec. otherwise the
memory contents will be copied to VFO.
w
Rotate [DIAL] to select the desired memory channel to be
cleared.
e
While pushing [MODE•SCAN], rotate [DIAL] to select
“CLEAR.”
• After releasing [MODE•SCAN], “CLR” is displayed instead of the
frequency indication, and only “ ” indicator blinks.
• “CLEAR” item can also be selected by pushing [MODE•SCAN]
several times.
r
Push [V/M•S.MW•
~
] for 1 sec. to clear the contents.
• 3 beeps sound.
• Return to VFO or memory mode, if VFO is selected before per-
forming the step
q
.
• Return to select memory write conditions if memory mode is se-
lected before performing the step
q
.— “ ” indicator memory
and channel number blink. Push [V/M•S.MW•
~
] momentarily
to return to memory mode.
While pushing [FUNC], push [V/M•S.MW•
~
] for 1 sec.
after the step
w
is operated can also be cleared the mem-
ory contents. In this case, the steps
e
and
r
are not nec-
essary.
☞
NOTE: Be careful!— the contents of cleared memories
CANNOT be re-called even in bank channel opera-
tion.
Push for 1 sec.
[V/M•S.MW•
~
]
[MODE•SCAN]
[DIAL]
After [MODE•SCAN]
released
IC-R5_1.qxd 02.10.23 11:28 Page 22 (1,1)