Icom IC-R5, Instruction Manual

Page: 44 / 80

33
7
PRIORITY WATCH
New2001
■
Priority watch operation
D D
Memory channel watch and memory scan watch
q
Select VFO mode; then, set an operating frequency.
• TV channel can also be selected.
w
Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
For memory scan watch:
Select memory mode, or the desired bank group; then,
push [MODE•SCAN] for 1 sec. to start memory/bank scan.
e
Push [TS•SET] for 1 sec. to enter set mode.
r
Rotate [DIAL] to select “PRIO” item.
t
While pushing [FUNC], rotate to turn the priority watch ON.
• Select “BELL” if the priority beep function is necessary.
y
Push [TS•SET] to exit set mode and start the watch.
• “PRIO” indicator appears.
• The receiver checks the memory/bank channel(s) every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 31)
u
Push [TS•SET] to cancel the watch.
FM SKIP P
PRIO
FM
PRIO
FM SKIP P
PRIO
FM
PRIO
• During priority watch
Monitors VFO frequency
for 5 sec. Pauses on a memory
(bank) channel when a
signal is received.
• During priority watch with priority beep
Emits beep and blinks “ S ” indicator when a signal is
received on a memory (bank) channel.
[TS•SET]
[FUNC]
[DIAL]
• Priority setting item
• Priority ON
• Priority beep ON
IC-R5_1.qxd 02.10.23 11:29 Page 33 (1,1)