Icom IC-R5, Instruction Manual

Page: 39 / 80

28
6
SCAN OPERATION
New2001
6
■
Memory/bank/all bank scan
q
Select memory mode with [V/M•S.MW•
~
].
• Select the desired bank with [BAND• ] for bank scan.
w
Set the squelch to the point where noise is just muted.
e
Push [MODE•SCAN] for 1 sec. to;
• When memory mode is selected at the step
q q
:
- start memory scan.
• When a bank channel is selected at the step
q q
:
- enter scan type selection mode.
r
Rotate [DIAL] to select the desired scanning type.
• “ALL” for all bank scan; “BANK” for bank scan.
t
Push [MODE•SCAN] momentarily to start all bank or bank
scan.
• Scan pauses when a signal is received.
• Rotate [DIAL] to change the scanning direction, or resumes
manually.
y
To stop the scan, push [MODE•SCAN].
IMPORTANT!: To perform memory or bank scan, 2 or
more memory/bank channels MUST be programmed, oth-
erwise the scan never starts.
FM AM DUP SQL DTCS T W FM AM DUP SQL DTCS T W
• During memory/all bank scan • During bank scan
[MODE•SCAN]
[DIAL]
• All bank scan selection
• Bank scan selection
IC-R5_1.qxd 02.10.23 11:29 Page 28 (1,1)