Icom IC-R5, Instruction Manual

Page: 47 / 80

36
8
TONE SQUELCH AND POCKET BEEP
New2001
8
■
Tone squelch frequency/DTCS code setting
88.5 Hz and 023 is set as the default for the tone squelch fre-
quency and the DTCS code, respectively. The frequency and
code can be selected as desired.
q
Push [TS•SET] for 1 sec. to enter set mode.
w
Rotate [DIAL] to select “EXPAND” item.
e
While pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON.
r
Rotate [DIAL] to select “TONE” item when selecting the
tone squelch frequency; select “CODE” item when select-
ing the DTCS code.
t
While pushing [FUNC], rotate [DIAL] to select the desired
subaudible tone frequency or DTCS code.
• See the tables at right.
y
Push [TS•SET] to exit set mode.
• Available tone frequency list
NOTE: The receiver has 50 tone frequencies and conse-
quently their spacing is narrow compared to units having
38 tones. Therefore, some tone frequencies may receive
interference from adjacent tone frequencies.
• Available DTCS code list
023
025
026
031
032
036
043
047
051
053 125
131
132
134
143
145
152
155
156
162 245
246
251
252
255
261
263
265
266
271 356
364
365
371
411
412
413
423
431
432
506
516
523
526
532
546
565
606
612
624 054
065
071
072
073
074
114
115
116
122
165
172
174
205
212
223
225
226
243
244 274
306
311
315
325
331
332
343
346
351
445
446
452
454
455
462
464
465
466
503 627
631
632
654
662
664
703
712
723
731 732
734
743
754
67.0
69.3
71.9
74.4
77.0 79.7
82.5
85.4
88.5
91.5 94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3 131.8
136.5
141.3
146.2
151.4 156.7
159.8
162.2
165.5
167.9 171.3
173.8
177.3
179.9
183.5 186.2
189.9
192.8
196.6
199.5 203.5
206.5
210.7
218.1
225.7 229.1
233.6
241.8
250.3
254.1
Tone squelch frequency selection
DTCS code selection
After
1 sec.
After
1 sec.
IC-R5_1.qxd 02.10.23 11:29 Page 36 (1,1)