Icom IC-R5, Instruction Manual

Page: 41 / 80

30
6
SCAN OPERATION
New2001
6
Memory channels can be set to be skipped for memory skip
scan. In addition, memory channels can be set to be skipped
for both memory skip scan and frequency skip scan. These
are useful to speed up the scan interval.
q
Select a memory channel:
➥
Push [V/M•S.MW•
~
] to select memory mode.
➥
Rotate [DIAL] to select the desired channel to be a skip
channel/frequency.
w
Push [V/M•S.MW•
~
] for 1 sec. to enter select memory
write condition.
e
Push [MODE•SCAN] several times to select “SKIP” item.
• While pushing [MODE•SCAN], rotating [DIAL] can also select
“SKIP” item.
r
While pushing [FUNC], rotate [DIAL] to select the skip con-
dition from “SKIP,” “PSKIP” or “OFF” for the selected chan-
nel.
• SKIP : The channel is skipped during memory or bank scan.
• PSKIP : The channel is skipped during memory/bank scan and
the programmed frequency is skipped during VFO scan,
such as programmed scan.
• OFF : The channel or programmed frequency is scanned dur-
ing any scan.
t
Push [MODE•SCAN] several times, or while pushing and
holding [MODE•SCAN] rotate [DIAL] to select “S.MW” item.
y
Push [V/M•S.MW•
~
] for 1 sec. to set the skip condition.
• “SKIP” or “P SKIP” indicator appears, according to the skip se-
lection in the step
r
.
✔
CONVENIENT!
The skip setting can also be set with the following operation
for easy setting.
q
Select the desired memory channel to be set as a skip
channel/frequency.
w
While pushing [FUNC], push [V/M•S.MW•
~
] to select the
skip condition from “SKIP,” “P SKIP” and “OFF
(no indication)
.”
FM SKIP P FM SKIP
• Skip channel setting • Program skip setting
“SKIP” appears “P SKIP” appears
[MODE•SCAN]
[DIAL]
• Skip setting
■
Skip channel/frequency setting
IC-R5_1.qxd 02.10.23 11:29 Page 30 (1,1)