Icom IC-R5, Instruction Manual

Page: 32 / 80

21
5
MEMORY CHANNELS
New2001
■
Copying memory contents
This function transfers a memory channel’s contents to VFO
(or another memory channel). This is useful when searching
for signals around a memory channel frequency and for re-
calling the offset frequency, subaudible tone frequency etc.
D
Memory
➪
VFO
q
Select the memory channel to be copied.
➥
Push [V/M•S.MW•
~
] to select memory mode, then ro-
tate [DIAL] to select the desired memory channel.
• Select the bank channel with [BAND• ] and [DIAL], if de-
sired.
w
Push [V/M•S.MW•
~
] for 1 sec. to select select memory
write condition.
• 1 short and 1 long beep sound.
• “
” indicator memory channel number blink.
e
Rotate [DIAL] to select “VF.”
r
Push [V/M•S.MW•
~
] for 1 sec. again.
• VFO mode is selected automatically.
Pushing [V/M•S.MW•
~
] for 2 sec. at the step
w
, can
also be copied the memory contents to VFO. In this case,
the steps
e
and
r
are not necessary.
D
Memory
➪
memory
q
Select the memory channel to be transferred.
➥
Push [V/M•S.MW•
~
] to select memory mode, then ro-
tate the tuning dial to select the desired memory channel.
w
Push [V/M•S.MW•
~
] for 1 sec. to select select memory
write condition.
• 1 short and 1 long beep sound.
• “
” indicator memory channel number blink.
• Do not hold [V/M•S.MW•
~
] for more than 1 sec. otherwise the
memory contents will be copied to VFO.
e
Rotate [DIAL] to select the target memory channel.
r
Push [V/M•S.MW•
~
] for 1 sec. again to transfer.
[EXAMPLE]: Copying channel 20 to 51.
FM DUP SQL T FM DUP SQL T FM DUP SQL SKIP T P
Push for 1 sec. Rotate
Select memory channel
Push for 1 sec.
IC-R5_1.qxd 02.10.23 11:28 Page 21 (1,1)