Icom IC-R5, Instruction Manual

Page: 52 / 80

41
9
SET MODE
New2001
D D
Dial select step
Select the tuning step while pushing [FUNC] from 100 kHz,
1 MHz (default) and 10 MHz.
D D
Priority watch
Turn the priority watch or priority beep (priority watch with
beep emission capability) ON.
(default: OFF)
• ON : Start priority watch after exiting set mode.
• BELL : Emits beeps and blinking “
S
” indicator when
a signal is received on the priority frequency.
D D
Key-touch beep
The key-touch beep can be turned OFF for silent operation.
(default: ON)
D D
Beep output level
Adjust the key-touch beep tone level to the desired level
within 32 levels or to the related level with volume control.
• VOLUME : The beep tone level is linked with the vol-
ume set level. (default)
• _ _ _ _ _ _ – ooo ooo
: The beep tone level is fixed in 32 steps.
The key-touch beep (previous item) must be set to ON to
have a beep tone.
D D
Display backlighting
The receiver has display backlighting with a 5 sec. timer for
nighttime operation. The backlighting can be turned ON con-
tinuously or turned OFF, if desired.
• AUTO : Lights when some operation is performed, goes
out after 5 sec. (default)
• ON : Lights continuously during receiver power is ON.
• OFF : Never lights.
Auto setting Continuously ON setting
Related to volume level Fixed output level
Key-touch beep ON Key-touch beep OFF
Priority watch ON Priority beep ON
1 MHz step 100 kHz step
IC-R5_1.qxd 02.10.23 11:29 Page 41 (1,1)