![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447047.webp)
7
NXDN OPERATION <TRUNKING MODE>
7-4
Transmitting a call
Group call (Transmission Trunked)
D
When you select an NXDN Trunking System zone and
a desired GID, you can transmit a Group call by simply
pushing [PTT].
When you set GID to “ALL,” you can call all transceiv-
ers.
Push [PTT] to make a Group call.
➥
For your reference:
When [Group + SDM (NXDN)] or [Group + Status
(NXDN)] is assigned, you can also send a message
along with a Group call.
To send a Short Data Message along with a Group
call.
Push [Group + SDM (NXDN)] to enter the GID Se
-
q
lect mode.
• Displays “SELCALL.”
Push [UP] or [DOWN] to select a desired GID.
w
Push [P1](ENT).
e
• Enters the Short Data Message Entry mode.
Push [UP] or [DOWN] to enter a character, and then
r
push [P1](SET) to set.
• Goes to the next character entry position.
• You can use the 10-keypad keys on the microphone.
Repeat step
t
r
until you enter a message of up to
100 characters.
• Push [P0](DEL) to delete a character.
• Push [P2](
Ω
) or [P3](
≈
) left or right to select a charac-
ter.
SHORT MESSAG
Push [PTT] to send the message to the selected
y
GID.
Push [P1](EXIT) to exit.
u
To send a Status Message with a Group call.
Push [Group + Status (NXDN)] to enter the GID Se
-
q
lect mode.
• Displays “SELCALL.”
Push [UP] or [DOWN] to select a desired GID.
w
Push [P1](ENT).
e
• Enters the Status Message Entry mode.
Push [UP] or [DOWN] to select a desired status
r
message.
• If you want to directly enter a status message, push [P2]
(MODE) to select the Status Message Entry mode.
You can enter a status message between 1 and 207.
• You can use the 10-keypad keys on the microphone.
STATUS
STATUS 001
Push [P3](TX) or [PTT] to send the message to the
t
selected GID.
Push [P1](EXIT) to exit.
y