![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447046.webp)
7
NXDN OPERATION <TRUNKING MODE>
7-3
Selecting a GID (Group ID)
Selecting a GID
D
To select a desired GID, do one of the following:
Push [CH/GID Up] or [CH/GID Down].
➥
Push one of the direct GID select keys, [Direct CH/
➥
GID 1] to [Direct CH/GID 5].
• You can change the GID that is selected by push
-
ing [Direct CH/GID 1] to [Direct CH/GID 5], as de-
scribed below.
Changing the Direct GID setting:
Select a desired GID.
q
Hold down one of the [Direct CH/GID 1] to [Direct
w
CH/GID 5] keys for 3 seconds to set the selected
GID to the Direct GID 1 to 5.
Directly entering a GID
D
You can select a GID by pushing [UP] or [DOWN], or
the [0] to [9] digit keys on the microphone, after pushing
[Channel Entry].
Or, when the Channel Entry function is assigned to the
keypad, you can select a GID by pushing the [0] to [9]
digit keys.
Push [Channel Entry] to enter the GID Entry mode.
q
CH ENTER MOD
CH No. _ _
w
Push [UP] or [DOWN] to select the GID, and then
push [P1](SEL).
• Push [P0](BACK) to cancel the entry, and return to the
screen that you selected before entering the GID Entry
mode.
GR 1
When the GID name is not programmed, the select-
ed zone and channel number are displayed.
(example: “1- 1”)
When using the DTMF microphone:
Push the [0] to [9] digit keys to enter the GID Entry
q
mode.
CH ENTER MOD
CH No. _ 1
Enter the GID number, and then push [#].
w
• Push [
M
] to delete the entered number.
• Push [
M
] again to cancel the entry, and return to the
screen that you selected before entering the GID Entry
mode.
GR 1
•
When the GID name is not programmed, the se-
lected zone and channel number are displayed.
(example: “1- 1”)
•
When less than 9 GIDs are programmed in the zone,
you can select a GID without pushing [#] in step
w
.
Selecting a Home GID
D
The Home GID is the most often-used ID, and you can
preset it into the transceiver.
Push [Home CH/GID].
➥
• You can change the Home GID, as described be
-
low.
Changing the Home GID setting:
Select a desired GID.
q
Hold down [Home CH/GID Select] for 3 seconds to
w
set the selected GID to the Home GID.