Operating instruction for pressure transmitter PASCAL CV4
4...20 mA, Type series CV3... with switching module
LABOM Mess- und Regeltechnik GmbH Im Gewerbepark 13 27798 Hude Germany
Hotline: +45 4408 804-444 Fax: +49 4408 804-100 e-mail: [email protected] www.labom.com
Operating instruction BA_029_2019-08_10.00
Page 1/6
Page 1
Further information required? H49 (0) 4408 804-444
BTA-No. 029 Rev. 1
F6
Operating Instructions
for pressure transmitter
PASCAL CV, 4...20 mA, Type Series CV 3
.
. . with switching module
Basic modules
PROFIBUS PA
Display module
HART
®
module
switching module
4...20 mA
Function modules
Various modules can easily be added to PASCAL CV (see table page 5).
www.pascal-cv.com
LABOM Mess- und Regeltechnik GmbH · P.O. Box 12 62 · 27795 Hude · Germany · Im Gewerbepark 13 · 27798 Hude · Germany
Tel. +49 4408 804-0 · Fax +49 4408 804-100 · e-mail: [email protected] · www.labom.com
Features
■
Modular pressure transmitter
Output signal:
4..20 mA, optional with HART
®
protocol
■
Function modules
●
Multifunctional display with 5-segment digital display
and bar graph
●
Switching module with 2 floating channels, maximum
0.5 A switching current, electrically isolated at all
sides, without additional auxiliary power
■
Function module replacement on site without recali-
bration "plug and measure"
■
Watchdog for electronics modules and measuring cell
■
Classfication per SIL 2
■
Accuracy:
≤
0,15 %
■
Turndown 5:1
■
Degree of protection IP 66
■
Piezoresistive measuring cell directly aerated, fully
welded, without inside gasket
