![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447036.webp)
5
MENU SCREEN
5-6
Menu functions (Continued)
Lone Worker
“LONE WORKER”
Turns the Lone Worker function ON or OFF. (p. 3-5)
When “LONE WORKER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
Low Transmit Power
“LOW TX POWER”
❍
In the Analog mode or
NXDN Conventional system
Toggles the transmit power between “High” and “Low,” if
“High” is set as the default.
When “LOW TX POWER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON (Low) or OFF
w
(High).
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
❍
In the NXDN Trunking system
Toggles the transmit power level.
When the transmit power level is set to “Auto” as the
default:
When “LOW TX POWER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON (Low) or OFF
w
(Auto).
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
When the transmit power level is set to “High” as the
default:
When “LOW TX POWER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON (Low) or OFF
w
(High).
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
See page 5-5 about [High Transmit Power].
Maintenance
“MAINTENANCE”
Enters the Maintenance Display mode.
In the Maintenance Display mode, you can check the
RSSI level of the selected channel for installation or
maintenance of the system.
When “MAINTENANCE” is displayed, push [P1](ENT).
q
• Displays the RSSI level.
• Push [P0](BACK) to return to the previous screen.
Push [P1](EXIT) to exit.
w
Monitor
“MONITOR”
❍
In the Analog mode
Turns the Monitor ON or OFF.
When the Monitor is ON, the transceiver releases the
CTCSS mute.
❍
In the NXDN Conventional system
Turns the Monitor ON or OFF.
When the Monitor is ON, the transceiver releases the
RAN code mute.
When “MONITOR” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
Operator Selectable Tone
“OST”
Turns the OST (Operator Selectable Tone) mode ON
or OFF.
When the OST mode is ON, the selected tone in the
OST list is enabled.
When “OST” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
OST List
“OST LIST”
Displays the OST (Operator Selectable Tone) list.
When “OST LIST” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a desired OST tone
w
or turn OFF the OST tone.
• Push [P0](BACK) to return to the previous screen.
Push [P1](EXIT) to exit.
e
Priority-channel Select
“PRI CH SEL”
Enters the Priority Channel Select mode for a Priority
scan.
Select a desired channel. (p. 2-4)
q
Push [MENU].
w
• Opens the Menu screen.
When “PRI CH SEL” is displayed, push [P1](ENT).
e
Push [UP] or [DOWN] to select “PRIORITY 1,” “PRI-
r
ORITY 2,” “PRIORITY 1 & 2” or “NORMAL.”
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK).
t
• Sets the selected channel to Priority 1, Priority 2, Priority
1 and 2 or a Normal channel.
NOTE:
When “PRIORITY 1 & 2” is selected, the
same channel is set as both Priority 1 and Priority 2
channels.