![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447034.webp)
5
MENU SCREEN
5-4
Menu functions (Continued)
Fixed Volume
“FIXED VOLUME”
Toggles the tone level between “High” and “Low,” or
turns OFF the tone.
When “FIXED VOLUME” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select “LOW,” “HIGH” or
w
“OFF.”
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
Forced Search
“FORCE SEARCH”
❍
In the NXDN Trunking system
Starts to search for a site.
When “FORCE SEARCH” is displayed, push [P1]
➥
(ENT).
• Displays “SEARCHING.”
GPS Position Display
“GPS POS DISP”
Enters the GPS Position Display mode.
In the GPS Position Display mode, you can check your
latitude and longitude position.
When “GPS POS DISP” is displayed, push [P1]
q
(ENT).
• You can check your latitude and longitude position.
Push [UP] or [DOWN] to toggle between the latitude
w
and longitude position display.
• Push [P0](BACK) to return to the previous screen.
• Push [P1](EXIT) to the GPS Position Display mode.
• Push [P2](DISP) to automatically switch the latitude and
longitude position display.
Group (NXDN)
“GROUP MODE”
❍
In the NXDN Conventional system or
the NXDN Trunking system
Enters the Group Call mode.
In the NXDN Conventional system, this function is used
for Group Calls.
In the NXDN Trunking system, the Group ID List is dis-
played, but the transceiver cannot make Group calls.
When “GROUP MODE” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select a desired GID.
w
Push [PTT] to call the selected GID.
e
Group + SDM (NXDN)
“GROUP+SDM”
❍
In the NXDN Conventional system or
the NXDN Trunking system
Enters the Group Call mode, and then the Short Data
Message Entry mode.
When “GROUP+SDM” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a desired GID.
w
Push [P1](ENT).
e
• Enters the Short Data Message Entry mode.
Push [UP] or [DOWN] to enter a character, and then
r
push [P1](SET) to set.
• Goes to the next character entry position.
• You can use the 10-keypad keys on the optional DTMF
microphone.
Repeat step
t
r
until you enter a message of up to
100 characters.
• Push [P0](DEL) to delete a character.
• Push [P2](
Ω
) or [P3](
≈
) left or right to select a charac-
ter.
Push [PTT] to send the message to the selected
y
GID.
Group + Status (NXDN)
“GROUP+STATUS”
❍
In the NXDN Conventional system or
the NXDN Trunking system
Enters the Group Call mode, and then the Status Mes-
sage Entry mode.
When “GROUP+STATUS” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select a desired GID, and
w
then push [P1](ENT).
• Enters the Status Message Selection mode.
Push [UP] or [DOWN] to select the status message
e
that you want to send.
• If you want to directly enter a status message, push [P2]
(MODE) to select the Status Message Entry mode.
You can enter a status message between 1 and 207.
• You can use the 10-keypad keys on the optional DTMF
microphone.
Push [P3](TX) to send the message to the selected
r
GID.