![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447064.webp)
8
NXDN OPERATION <CONVENTIONAL MODE>
8-7
Receiving a call (Continued)
Individual Call Acknowledge Request call
D
When you receive an Individual Call with an acknowl-
edgement request which includes your own Individual
ID, your transceiver automatically transmits a acknowl-
edgement signal, and informs you the calling by beep
sounds and bell mark blinks on the function display. In
addition, you can easily call back to the calling trans-
ceiver.
When you receive an Individual call with an acknowl-
q
edgement request signal that includes your unit ID:
• Beeps sound.
• Alternately displays the caller’s unit ID and “INCOMING.”
• “
” blinks for about 30 seconds.
To call back to the caller station, push [PTT] while
w
“ ” is blinking.
Status call
D
When you receive a Status call, your transceiver dis-
plays a received status message on the function display.
The received message is stored in the Memory Stack,
and you can view the message contents in the memory.
(p. 6-3)
When you receive a Status call:
➥
• Beeps sound.
• Displays “DATA RCVD,” “COMPLETE,” the received mes
-
sage, the caller’s unit ID and GID*.
*Displayed only when the received call is the Group call.
• “
” blinks on the function display.
The message is stored in the Memory Stack.
UID 0001
GID 0002
COMPLETE
STATUS 001