![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447035.webp)
5
MENU SCREEN
5-5
Menu functions (Continued)
High Transmit Power
“HI TX POWER”
❍
In the NXDN Trunking system
Toggles the transmit power level.
When “Auto” is set as the default:
When “HI TX POWER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON (High) or OFF
w
(Auto).
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
When “Low” is set as the default:
When “HI TX POWER” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON (High) or OFF
w
(Low).
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
See page 5-6 about [Low Transmit Power].
Home CH/GID Select
“HOME CHANNEL”
Sets the selected channel or GID as the Home Chan-
nel.
Select a desired channel. (p. 2-4)
q
Push [MENU].
w
• Opens the Menu screen.
When “HOME CHANNEL” is displayed, push [P1]
e
(ENT).
• Sets the selected channel or GID as the Home Channel.
Horn Alert
“HORN ALERT”
Turns the Horn Alert function ON or OFF.
When this function is ON, the horn alert port will be ac-
tivated for a preset time period after receiving a call.
When “
q
HORN ALERT” is displayed, push [P1](ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
Individual (NXDN)
“INDIVIDUAL”
Enters the Individual Call mode.
When “INDIVIDUAL” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a desired unit ID.
w
• If you want to directly enter an unit ID, push [P2](MODE)
to select the Unit ID Entry mode.
You can enter an unit ID between 1 and 65519.
Push [P3](TX) to call to the selected unit ID.
e
Indi SDM (NXDN)
“INDIV+SDM”
Enters the Individual Call mode, and then the Short
Data Message Entry mode.
When “INDIV+SDM” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a desired unit ID.
w
• If you want to directly enter an unit ID, push [P2](MODE)
to select the Unit ID Entry mode.
You can enter an unit ID between 1 and 65519.
Push [P1](ENT).
e
• Enters the Short Data Message Entry mode.
Push [UP] or [DOWN] to enter a character, and then
r
push [P1](SET) to set.
• Goes to the next character entry position.
• You can use the 10-keypad keys on the optional DTMF
microphone.
Repeat step
t
r
until you enter a message of up to
100 characters.
• Push [P0](DEL) to delete a character.
• Push [P2](
Ω
) or [P3](
≈
) left or right to select a charac-
ter.
Push [PTT] to send the message to the selected unit
y
ID.
Indi Status (NXDN)
“INDIV+STATUS”
Enters the Individual Call mode, and then the Status
Message Entry mode.
When “INDIV+STATUS” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select a desired unit ID.
w
• If you want to directly enter an unit ID, push [P2](MODE)
to select the Unit ID Entry mode.
You can enter an unit ID between 1 and 65519.
Push [P1](ENT).
e
• Enters the Status Message Selection mode.
Push [UP] or [DOWN] to select a status message
e
that you want to send.
• If you want to directly enter a status message, push [P2]
(MODE) to select the Status Message Entry mode.
You can enter a status message between 1 and 207.
• You can use the 10-keypad keys on the optional DTMF
microphone.
Push [P3](TX) to send the message to the selected
r
unit ID.
LCD Brightness
“LCD BRIGHT”
Selects the brightness of the function display and keys
backlight.
Select High, Low or OFF to meet your needs.
The function display and keys can be backlit for better
visibility under low light conditions.
When “LCD BRIGHT” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select “LOW,” “HIGH” or
w
“OFF.”
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e