![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447037.webp)
5
MENU SCREEN
5-7
Menu functions (Continued)
Public Address
“PUB ADDRESS”
Turns the Public Address function ON or OFF.
When this function is ON, you can make announce-
ments through a PA speaker.
• Transmitting is disabled while in the PA mode.
When “PUB ADDRESS” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e
RX Audio Equalizer
“RX AUDIO EQ”
This function sets the audio characteristics type to ap-
ply to the received audio.
When “RX AUDIO EQ” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select the option.
w
• Push [P0](BACK) to return to the previous screen.
• FLAT:
Selects the standard audio characteristics.
• HIGH BOOST:
Emphasizes the treble range.
• LOW BOOST:
Suppresses the treble range and boosts the
bass range.
Push [P1](EXIT) to save.
e
RX Auto Gain Control
“RX AUTO GAIN”
This function automatically adjusts the received audio
volume to an appropriate level so that you can clearly
hear the audio.
When “RX AUTO GAIN” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select the option.
w
• Push [P0](BACK) to return to the previous screen.
• OFF: Disables the Auto Gain Control. The received
audio level is only adjusted by [VOL].
• HIGH: Enables the Auto Gain Control. The received
audio level will be automatically adjusted to
an appropriate constant level, according to
the [VOL] setting. However, the background
noise will be boosted, and howling may oc-
cur, depending on your operating environ-
ment.
• LOW: Enables the Auto Gain Control. The received
audio level will be automatically adjusted to
an appropriate constant level, according
to the [VOL] setting. However, the adjust-
able gain is smaller than the “HIGH” setting.
Therefore, background noise boosting will
also be smaller, and howling may not occur.
Push [P1](EXIT) to save.
e
RX Low Cut
“RX LOW CUT”
While receiving a digital signal, this function cuts the
frequency components at 300 Hz or below.
When “RX LOW CUT” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](EXIT) to save.
e
Scan
“SCAN”
Starts or stops a scan.
When “SCAN” is displayed, push [P1](ENT).
q
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK).
e
• A scan starts when “ON” is selected in step
w
.
• A scan stops when “OFF” is selected in step
w
.
Scan Delete/Add
“SCAN DEL/ADD”
Sets or cancels the selected channel or GID as the
scan target.
Select a desired channel. (p. 2-4)
q
Push [MENU].
w
• Opens the Menu screen.
When “SCAN DEL/ADD” is displayed, push [P1]
e
(ENT).
Push [UP] or [DOWN] to select “DELETE” or “ADD.”
r
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK).
t
• The selected channel is canceled as a scan target when
“DELETE” is selected in step
r
.
• The selected channel is set as a scan target when “ADD”
is selected in step
r
.
Scrambler/Encryption
“SCRAM/ENCRYP”
❍
In the Analog mode
Turns the Scrambler function ON or OFF.
❍
In the NXDN Conventional system or
the NXDN Trunking system
Turns the Encryption function ON or OFF.
When “SCRAM/ENCRYP” is displayed, push [P1]
q
(ENT).
Push [UP] or [DOWN] to select ON or OFF.
w
• Push [P0](BACK) to return to the previous screen.
Push [P1](OK) to save.
e