![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447050.webp)
7
NXDN OPERATION <TRUNKING MODE>
7-7
Broadcast Group call
D
When you use the Broadcast Group call function, you
can transmit a signal to transceivers that are set to the
same Group ID.
When you set GID to “ALL,” you can make the Broad-
cast Group call to all transceivers.
Select a desired GID. (p. 7-3)
q
Push [Broadcast] once or twice to select “BRDCAST
w
ON.”
BRDCAST ON
Push [PTT] to make a Broadcast Group call.
e
Status call
D
The Status call is a simple message function to trans-
mit and receive a status message. A transceiver can
display the status message quickly. You cannot transmit
a voice signal at the same time.
Push [Status (NXDN)] to enter the Status Message
q
Select mode.
• Displays “STATUS.”
Push [UP] or [DOWN] to select a desired status
w
message.
• If you want to directly enter a status message, push [P2]
(MODE) to select the Status Message Entry mode.
You can enter a status message between 1 and 207.
• You can use the 10-keypad keys on the microphone.
STATUS
STATUS 001
Push [P3](TX) or [PTT] to send the selected Status
e
Message.
• Displays “SEND DATA” and then “COMPLETE.”
Transmitting a call (Continued)