![background image](http://html1.mh-extra.com/html/icom/ic-f5360d/ic-f5360d_operating-instructions-manual_4287447022.webp)
3
ADVANCED OPERATION
3-5
Emergency Calls
Emergency Calls
D
When [Emergency] is assigned to [
R
], you can manu-
ally make an Emergency call.
Hold down [
q
R
] for 1 second.
• Enters the Emergency mode.
• When the transceiver enters the Emergency mode, it will
change to the Emergency channel and begin transmit-
ting, according to the presetting.
To exit from the Emergency mode, hold down [
w
R
]
again, or turn OFF the power.
• If the Emergency mode completes a preset number of
call cycles, the transceiver will automatically exit the
mode and return to the zone and channel that was in use
before you entered the Emergency mode.
Lone Worker Emergency Call
D
When the Lone Worker function is activated, the Emer-
gency function is automatically turned ON, after the
preset time period has passed with no operation per-
formed.
Push [Lone Worker] to turn the function ON or OFF.
➥
NOTE:
The Emergency Mode Type can be set to “Silent” or
“Audible” by using the optional cloning software.
When “Audible” is set, the transceiver sounds a beep
when transmitting in the Emergency mode.
[
R
]